Displaying Stp Guard Configuration - Dell Force10 S4810P Configuration Manual

Displaying STP Guard Configuration

To verify the STP guard configured on port or port-channel interfaces, enter the
[ interface
interface]
The example below shows an STP network (instance 0) in which:
• Root guard is enabled on a port that is in a root-inconsistent state.
• Loop guard is enabled on a port that is in a listening state.
• BPDU guard is enabled on a port that is shut down (Error Disabled state) after receiving a BPDU.
FTOS#show spanning-tree 0 guard
Interface
Name Instance
--------- --------
Gi 0/1 0
Gi 0/2 0
Gi 0/3 0
command.
Sts Guard type
--------- ----------
INCON(Root) Rootguard
LIS Loopguard
EDS (Shut) Bpduguard
show spanning-tree 0 guard
Spanning Tree Protocol (STP) | 1021