Set Recurring Daylight Saving Time - Dell Force10 S4810P Configuration Manual

Set Recurring Daylight Saving Time

Set a date (and time zone) on which to convert the switch to daylight saving time on a specific day every
year.
If you have already set daylight saving for a one-time setting, you can set that date and time as the
recurring setting with the
Command Syntax
clock summer-time
time-zone recurring
start-week start-day
start-month start-time
end-week end-day
end-month end-time
[offset]
1036
| System Time and Date
clock summer-time time-zone recurring
Command Mode
CONFIGURATION
command.
Purpose
Set the clock to the appropriate timezone and adjust to
daylight saving time every year.
time-zone: Enter the three-letter name for the time
zone. This name is displayed in the show clock output.
(OPTIONAL) Enter one of the following as the
start-week:
week that daylight saving begins and then enter values for
through :
start-day end-time
• Enter a number from 1-4 as the number
week-number:
of the week in the month to start daylight saving time.
• Enter this keyword to start daylight saving time in the
first:
first week of the month.
• Enter this keyword to start daylight saving time in the
last:
last week of the month.
Enter the name of one of the 12 months in
start-month:
English.
You can enter the name of a day to change the order of the
display to
time day month year
Enter the number of the day.
start-day:
Range: 1 to 31.
You can enter the name of a month to change the order of the
display to
time day month year
.