Dell Force10 S4810P Configuration Manual page 1029

Step Command Syntax
2
ntp authentication-key
3
ntp trusted-key
number
To view the NTP configuration, use the
privilege mode. Figure 50-5
Figure 50-5. show running-config ntp Command Example
FTOS#show running ntp
!
ntp authenticate
ntp authentication-key 345 md5 5A60910F3D211F02
ntp server 11.1.1.1 version 3
ntp trusted-key 345
FTOS#
Command Mode
CONFIGURATION
md5
number key
CONFIGURATION
show running-config ntp
shows an encrypted authentication key. All keys are encrypted.
Purpose
Set an authentication key. Configure the
following parameters:
Range 1 to 4294967295. This
number:
must be the same as the
number
the ntp trusted-key command.
Enter a text string. This text string is
key:
encrypted.
Define a trusted key. Configure a number
from 1 to 4294967295.
The must be the same as the
number
used in the ntp
number
authentication-key command.
command (Figure 40) in the EXEC
encrypted key
System Time and Date | 1029
in
number