Avaya Communication Manager Administrator's Manual page 619

Administering SNMP Trap Filters
Use the Filters page to specify the severity level, alarm category, and maintenance object
information for the SNMP agent. In CM 3.1, filters only apply to CM alarms. Server alarms
cannot be filtered.
Note:
If you have Fault and Performance Manager (FPM), then create the filters using
Note:
the Fault and Performance Manager application. The Fault and Performance
Manager application provides additional capabilities that are not available from
the Web pages. Do not enter IP addresses used for FPM on the
Destination
Adding trap filters
To add a trap filter:
1. On the Maintenance Web Pages home page, under Alarms, click Filters.
The system displays the Filters page.
Figure 227: Filters page
The Filters section of the screen displays Severity, Category, MO Type, and MO Location for
filters that have already been configured. In this example, no filters are currently configured.
The Customer Alarm Reporting Options section allows you to specify the Communication
Manager alarms to be sent: Major and Minor only, or all CM alarms.
page.
Administering SNMP Agents
Add Trap
Issue 2.1 May 2006 619