Avaya Communication Manager Administrator's Manual page 614

Administering Media Servers
Figure 223: Add Trap Destination page
3. Check the Check to enable this destination box.
4. In the IP address field, enter the IP address for destination.
Note:
If you have Fault and Performance Manager (FPM), create filters using the Fault
Note:
and Performance Manager application. The Fault and Performance Manager
application provides additional capabilities that are not available from the Web
pages. Do not enter IP addresses used for FPM on the Add Trap Destination
page.
5. Select the SNMP version for the destination of the traps. You can select one or more than
one version.
6. Complete the fields associated with the version(s) you selected:
- SNMP version 1
In the Community name field, enter the SNMP community name.
614 Administrator Guide for Avaya Communication Manager