Avaya Communication Manager Administrator's Manual page 568

Administering Media Servers
3. Log in as prompted.
The default user name is: root
●
The default password for read-write access is: root
●
Note:
You should change the default passwords after you log in, if they have not
Note:
already been changed. The passwords apply to all logins for these devices,
whether accessed through Device Manager or a CLI.
4. The Welcome screen is displayed. Proceed with P330 and media gateway device
administration.
Accessing Device Manager through Network Management Console with
VoIP SystemView
You can alternatively launch the P330 Device Manager from the Avaya Network Management
Console with VoIP SystemView. This optional product is a complete Network Management
System (NMS). Services include:
viewing all network devices by type, subnet, or customized groupings
●
logging and viewing SNMP traps and events
●
launching and managing other applications including Avaya Site Administration
●
Contact your Avaya representative to obtain a copy of this program if desired.
Administering the command line interface
Instead of using Device Manager, you can access the server's command line interface using an
SSH client, like PuTTY, and an IP address of 192.11.13.6., or use the serial interface on the
front of the chassis to establish a direct connection to the P330 stack processor.
Command line interface (CLI) access procedures are covered in Welcome to the Avaya
●
G700 Media Gateway controlled by an Avaya S8300 Media Server or an Avaya S8700
Media Server, 555-234-200.
For a list of CLI commands, see the Maintenance for the Avaya G700 Media Gateway
●
controlled by an Avaya S8300 Media Server or an Avaya S8700 Media Server,
555-234-101.
SNMP alarms are different from server hardware- or software-generated Operations Support
System (OSS) alarms that are recorded in the server logs, and might be reported to Avaya's
Initialization and Administration System (INADS) or another services support agency over the
server's optional modem interface or through SNMP notifications. Either method, both, or no
alarm-reporting method might be used at a given site.
568 Administrator Guide for Avaya Communication Manager