To view the end-user access windows:
IE browser window
Point the IE browser to port 88 of your Sentriant AG ES. For example, if the IP address of your
Sentriant AG ES is 10.0.16.18, point an IE browser window to:
http://10.0.16.18:88
NOTE
If you would like to use a port other than 88, contact Extreme Networks, Inc. Technical Assistance Center (TAC) at
support@extremenetworks.com for assistance in making the necessary changes.
How Sentriant AG Handles Static IP Addresses
The following list details how Sentriant AG handles static IP addresses:
Inline Mode—Sentriant AG can detect, test, and quarantine static IP addresses. The end-user cannot
●
circumvent a quarantine.
DHCP mode
●
Sentriant AG can detect and test static IP addresses but cannot quarantine static IP addresses.
■
Sentriant AG can detect static IP endpoints in two different ways:
■
Any type of traffic from the endpoint can be detected if that endpoint has any network traffic
●
visible by Sentriant AG
By using the Agent Callback feature (see
●
An endpoint with a static IP address can be automatically tested only if the endpoint:
■
Has credentials stored for agentless testing.
●
Already has the agent installed.
●
If you do not use the items in the previous list, you cannot capture the users attention in their browser
to force them to supply credentials or install an agent and get tested.
If an endpoint has a static IP address and it can't be tested automatically, the endpoint shows up
■
as awaiting test initiation in the Endpoint activity window.
Any mode—An administrator can manually test any endpoint by pointing the endpoint's browser to
●
http://Sentriant AG Enforcement server IP address>:88.
IP addresses.
Sentriant AG Software Users Guide, Version 5.2
"Agent Callback" on page
This includes endpoints with static
System Administration
167).
387