Mapping Cos Values To Queues - Dell PowerConnect 2808 User Manual

Mapping CoS Values to Queues

The CoS to Queue Mapping Table page contains fields for classifying CoS settings to traffic queues. To
open the CoS to Queue Mapping Table page, click Quality of ServiceCoS Global Parameters CoS
to Queue in the tree view.
Figure 9-5. CoS to Queue Mapping Table
• Class of Service — Specifies the CoS priority tag values, where zero is the lowest value and 7 is the
highest value.
• Queue — The traffic forwarding queue to which the CoS priority is mapped. Four traffic priority
queues are supported.
Restore Defaults — Restores the device factory defaults for mapping CoS values to a forwarding queue.
Mapping a CoS value to a Queue
1 Open the CoS to Queue Mapping Table page.
2 Select a CoS entry.
3 Define the queue number in the Queue field.
4 Click Apply Changes.
The CoS value is mapped to a queue, and the device is updated.
150
Dell PowerConnect 28xx Systems User Guide