Gigabit Port LEDs
The following table describes the Gigabit (stacking port) LEDs:
Table 2-3. PowerConnect 3424 and PowerConnect 3448 RJ-45 Copper based 100BaseT LED Indications
LED
Color
Link/Activity/Speed
Green Static
Green Flashing
Yellow Static
Yellow Flashing
OFF
FDX
Green Static
OFF
SFP LEDs
The SFP ports each have one LED marked as LNK/ACT. On the PowerConnect 3424/P and
PowerConnect 3448/P devices, the LEDs are located between ports and are round in shape.
The following figures illustrate the LEDs on each device.
Figure 2-8. SFP Port LEDs
The SFP port LED indications are described in the following table:
Table 2-4. SFP Port LED Indications
LED
Link/Activity
Description
The port is running at 1000 Mbs.
The port is either transmitting or receiving data at 1000 Mbps.
The port is running at 10 or 100Mbs.
The port is either transmitting or receiving data at
10 or 100 Mbps.
The port is currently not operating.
The port is currently operating in Full Duplex mode.
The port is currently operating in Half Duplex mode.
Color
Description
Green Static
A link is established.
Green Flashing The port is currently transmitting or receiving data.
OFF
The port is currently not linked.
Hardware Description
43