Port-Side Leds - Dell MXG610s Setup Manual

For instructions specific to a cable type, see the cable manufacturer's documentation.

Port-side LEDs

Each switch module uses bicolored external LEDs to indicate operation status. After you
install the switch module in a blade server chassis I/O module, the LEDs become active.
Figure 11. Switch module front panel LEDs
1 FC port 0 status LED
3 FC port 24 status LED
5 Module identification LED
Table 1. Port-side LEDs
LED
Module power and status LED
Module identification LED
2 FC port 17 status LED
4 Module power status LED
Description
• Solid green—The switch is working
correctly.
• Blinking amber—The switch is working
incorrectly. The temperature may be too
high, a software error has occurred, or
another error is discovered.
• Off—There is no power supplied to the
FC switch module. Reseat the module
and ensure that the chassis power is on
and it has adequate power for the I/O
module.
• Off—Module is not identified.
MXG610s Setup Guide 13