Device-Count - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

device-count

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
954
device-count number;
[edit chassis aggregated-devices ethernet]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure the number of aggregated Ethernet logical devices available to the switch.
There is no default. You must configure a value.
number —Maximum number of aggregated Ethernet logical interfaces on the switch.
Range: 1 through 64 for J-EX4200 switches
1 through 255 for J-EX8200 switches
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between a Virtual
Chassis Access Switch and a Virtual Chassis Distribution Switch on page 740
Configuring Aggregated Ethernet Interfaces (CLI Procedure) on page 922
Junos OS System Basics Configuration Guide at
http://www.juniper.net/techpubs/software/junos/