Table of Contents
Advertisement
UTILITY STITCHES
Eyelet
Use this stitch for making belt holes and other similar
applications.
Memo
• For details on stitch patterns, refer to "STITCH
SETTING CHART" on page 194.
a
Select a stitch.
b
Use
in either the stitch width display or the
stitch length display to choose the size of the eyelet
(page 62).
c
Attach monogramming foot "N", then rotate the
handwheel toward you (counterclockwise) to check
the needle drop point.
a
d
Lower the presser foot and start sewing.
When sewing is finished, the machine sews
reinforcement stitches and stops automatically.
e
Use the eyelet punch to make a hole in the center of
the stitching.
94
1 Needle drop point
Multi-Directional Sewing (Straight Stitch
and Zigzag Stitch)
Use these stitch patterns to attach patches or emblems
to pant legs, shirt sleeves, etc.
Memo
• For details on stitch patterns, refer to "STITCH
SETTING CHART" on page 194.
a
Remove the flat bed attachment to use the free-arm.
Memo
• Insert the tubular piece of fabric onto the free-arm,
and then sew in the order shown in the illustration.
b
Select
and attach monogramming foot "N".
c
Set the needle in the fabric at the sewing start point,
and sew seam "1" as shown.
d
Select
and sew seam "2" as shown.
*
The fabric will move sideways, guide the fabric by
hand to keep sewing straight.
1 Start Point
a
Advertisement
Table of Contents
