Table of Contents
Advertisement
■ Attaching a Shank to the Button
a
Pull the shank lever toward you before
sewing.
a Shank lever
b
After sewing is finished, cut the upper
thread with plenty of excess, wind it around
the thread between the button and the
fabric, and then tie it to the upper thread
from the beginning of the stitching.
c
Tie the ends of the bobbin thread from the
beginning and end of sewing together on
the wrong side of the fabric.
Note
• When sewing is completed, be sure to select
another stitch and rotate the handwheel
toward you (counterclockwise) to raise the
feed dogs.
d
Cut off any excess thread.
Eyelet
Use this stitch for making belt holes and other
similar applications.
Stitch
Stitch name
Eyelet
Star eyelet
a
Select
or
.
b
Use
in either the stitch width
display or the stitch length display to
choose the size of the eyelet.
a Large 7 mm (approx. 9/32 inch)
b Medium 6 mm (approx. 15/64 inch)
c Small 5 mm (approx. 13/64 inch)
Memo
• Only one size is available for
c
Attach advanced monogramming foot
"N+", then rotate the handwheel toward
you (counterclockwise) to check the needle
drop position.
a Needle drop position
d
Lower the presser foot and start sewing.
When sewing is finished, the machine sews
reinforcement stitches and stops automatically.
Note
• If the stitch pattern comes out poorly, make
adjustments to "SEWING STITCH
PATTERNS" on page 150.
SEWING THE STITCHES
Presser foot
.
3
137
Advertisement
Table of Contents
