Schedule Reboot At - 3Com Switch 4500 Family Manual

Examples
# Directly restart this switch without saving the current configuration.
<Sysname> reboot
Start to check configuration with next startup configuration file,
please wait......
This command will reboot the device. Current configuration will be lost in next startup if
you continue.
This will reboot device. Continue? [Y/N] y
<Sysname>
%Apr 2 00:06:01:148 2006 Sysname DEV/5/DEV_LOG:- 1 -
Switch is rebooting...
Starting......

schedule reboot at

Syntax
schedule reboot at hh:mm [ mm/dd/yyyy | yyyy/mm/dd ]
undo schedule reboot
View
User view
Parameters
hh:mm: Reboot time, where hh (hour) ranges from 0 to 23, and mm (minute) ranges from 0 to 59.
mm/dd/yyyy and yyyy/mm/dd: Two formats used to specify the reboot date, where yyyy (year) ranges
from 2,000 to 2,099, mm (month) ranges from 1 to 12, and the range of dd (day) depends on the specific
month. You cannot set the date 30 days later than the system current date.
Description
Use the schedule reboot at command to enable the scheduled reboot function on the current switch
and set the reboot date and time.
Use the undo schedule reboot command to disable the scheduled reboot function.
By default, no scheduled reboot is set on the switch.
The switch timer can be set to a precision of one minute, that is, the switch will reboot within one minute
after the specified reboot date and time.
Note that:
Continue? [Y/N] y
3-13