Write - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Administrator's Guide
•
basic
•
•
•
—Specify a proxy to be used for any HTTP or FTP downloads. If no port is specified,
host
the default is 1080.

write

write
memory
terminal
Notes:
•
memory
•
terminal
configuration. Lists commands to recreate the current running configuration.
—Configure HTTP basic authentication settings for the Web proxy.
password <plaintext_password>
basic authentication with an authenticating proxy. Only used if the web proxy
auth authtype is set to basic. The password is accepted and stored in plaintext.
username <username>
an authenticating proxy. Only used if the web proxy auth authtype is set to
basic. The user name is accepted and stored in plaintext.
—Save running configuration to the active configuration file.
—Show the currently running configuration, rather than the active saved
—Specify a plaintext password for HTTP
—Specify a username for HTTP basic authentication with
Media Flow Controller CLI Commands
write 383