Media Flow Controller Cli Commands - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller CLI Commands

CHAPTER 10
Media Flow Controller CLI Commands
Note! Certain commands only appear if you are in one of the three command modes. See
"CLI Options" on page 60
EXEC commands.
aaa (authentication, authorization, accounting). Set authentication and authorization.
accesslog
analytics
application
arp (address resolution protocol). Set ARP servers.
banner Manage Web banners.
bond Configure bonded interfaces.
boot Configure system booting.
cachelog
clear EXEC. Clear the arp cache.
cli CLI shell options.
clock Set the system date and time.
cmc Configure authorization (auth), client, and rendezvous options for Central Management
Console management of a Media Flow Controller.
collect counters
configuration
configure
debug Generate a "dump" of the system debugging utility.
delivery Set delivery protocol options, including enabling delivery trace.
email Configure email and event notification via email.
enable Go to Enable mode for additional commands; disallowed for unpriv users.
errorlog Configure error log.
exit Leave Configuration mode, or close the CLI window if in Standard mode.
file Manipulate stats, and tcpdump reports.
fmsaccesslog
fmsedgelog
fuselog Records RTMP transaction details.
help View the interactive help system.
hostname
image Manage software images.
Copyright © 2010, Juniper Networks, Inc.
for details. Commands that do not require being in a mode are
Configure access log.
Configure cache analytics options.
Configure Flash Media Server integration.
Configure cache log.
Special debugging tool for use with Customer Support.
Manipulate configuration files.
Go to Configuration mode for additional commands; disallowed for unpriv users.
Lists all FMS server command executions.
Lists transactions to the FMS edge server.
Set the system hostname.
Media Flow Controller Administrator's Guide
287