Streamlog Format Options; Table 36 Streamlog Format Options - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller CLI Commands
on-the-hour {disable | enable}
rotate {filesize-MB <integer> | time-interval <integer>}
syslog replicate {disable | enable}
Notes:
•
—Auto upload (when the set rotate criteria is reached) the stream log using SCP
copy
(secure channel protocol), to the server specified using hostname. If username and
password are provided, Media Flow Controller uses that for authentication of the SCP
session. The no variant disallows auto upload. See
URL format); you must have an SCP server installed in order to SCP files to your
machine.
•
filename
streamlog.<num>.yyyymmdd_hour:min:sec (numbered sequentially).
•
format
"%r" %s %I %O. See
•
<field1 field2 ...>
•
clf
•
display
•
on-the-hour
•
rotate
•
filesize-MB
streamlogs, numbered sequentially, after which it wraps around. By default, each file
size is 100MB. We highly recommend not increasing the size; huge file transfers take
a lot of time, and if there is a system reset, large volumes of data are at risk.
•
time-interval
the streamlog is rotated. Default is 0 hours disabled.
•
syslog replicate
part of SYSLOG; default is disable (streaming log is not seen as part of SYSLOG).

streamlog format Options

Options are (use any combination) shown in
Table 36 streamlog format Options
Field
Average bandwidth in bytes per second.
(avg b/w)
%a
Destination IP address in the RTSP request.
(s-ip)
%c
(r-ip) Origin server IP address.
%d
Length of the stream in seconds.
(filelength)
%f
Client Source IP address.
(c-ip)
%h
Player information used in the header (User-Agent).
%i
Timestamp (seconds since Epoch) when transaction ended.
(timestamp)
%j
366 streamlog
—Configure the name of the file where the streaming log is stored. Default is
—Specify a format for the stream log. Use no to reset to default: "%h %c %t %x
Table 36, for field option details.
—Choose available field options, described in
—Common Log Format: %h %V %u %t %r %s %b
—Either enable (default) or disable the display of the format in the log.
—Set hourly log rotation. Default is no (disabled).
—Media Flow Controller allows streaming log rotation based on file size or time.
—Set rotation based on file size. Media Flow Controller creates ten
—Set rotation based on time. Specify a time in minutes after which
—Specify whether (enable) or not streamlog messages are seen as
Description
Media Flow Controller Administrator's Guide
"Terminology" on page 30
Table 36.
Copyright © 2010, Juniper Networks, Inc.
for the scp
Table 36.
Example s
35390
192.155.14.14
123.14.14.55
55
207.19.19.20
NSPlayer
963873698.73