Configuring Aaa (Web Interface); Figure 26 Aaa Page - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Configuration Tasks (Web Interface)
Change Password
Change or set a password for each configured user. See
1. For each user, admin, cmcclient, cmcrendv, and monitor are default users, set or
change the password. May be left empty if no password is required.
2. Click Save at the top of the page to make changes persistent across reboots.

Configuring AAA (Web Interface)

Configure AAA (authentication, authorization and accounting) settings; accounting options are
not supported at this time. RADIUS or TACACS+ authentication must be configured before
these options can be specified with this command.
To configure AAA authentication:
•
From the left navigation pane in the System Config tab, select AAA.
The AAA Authentication page is displayed. See
Figure 26 AAA Page
Authentication Method List
Set the list of acceptable authentication methods for system logins. See
To set authentication method order:
1. Choose from the drop-down list for First Method, Second Method, and Third Method,
authentication methods. The order in which the methods are specified is the order in
which they are attempted. The authentication methods must be configured.
2. Click Apply to complete operation; Cancel to revert to existing configuration.
3. Click Save at the top of the page to make changes persistent across reboots.
142 Configuring Users and AAA (Web Interface)
Media Flow Controller Administrator's Guide
Figure 25.
Figure 26.
Figure
Copyright © 2010, Juniper Networks, Inc.
26.