Stream Log Configuration; Figure 61 Log Configuration Page Detail (Access Log Copy/Auto Upload Configuration); Figure 62 Log Configuration Page Detail (Stream Log Configuration) - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Configuration Tasks (Web Interface)
3. Click Save at the top of the page to make changes persistent across reboots.
Tip! If this Media Flow Controller is going to be managed by a CMC server, set the auto-
upload URL to the address of the CMC server and the filepath to /log.
Figure 61 Log Configuration Page Detail (Access Log Copy/Auto Upload Configuration)

Stream Log Configuration

This log records RTSP streaming transactions. See
details. See
To configure the streamlog:
1. Enter this information to the text boxes or select the checkbox as described:
• Enable—Enable access logging; this records all user activity on the system. The no
variant disables. Default is enabled.
• Syslog Replicate Enable—Specify whether or not the stream log messages are seen
as part of SYSLOG also. By default the option is disabled (access log is not seen as
part of SYSLOG).
• Log Format—Specify the format in which stream log is to be obtained. See
streamlog
2. Click Apply.
3. Click Save at the top of the page to make changes persistent across reboots.
Figure 62 Log Configuration Page Detail (Stream Log Configuration)
188 Configuring Service Logging (Web Interface)
Figure 60.
for CLI details on log formatting.
Media Flow Controller Administrator's Guide
"Stream Log (streamlog)" on page 220
Copyright © 2010, Juniper Networks, Inc.
for