Media Flow Controller Administrator's Guide
•
seek-length query-string-parm
of data to send from the seek start position; referenced value must be in bytes.
•
enable-tunnel
this option needs to be selected only when the origin site changes their seek
mechanism. Default is disabled.
virtual-player type smoothstream-pub
This virtual-player type is not supported in Release 2.0.4.
web
Use these commands to enable and configure settings for the Web interface (also referred to
as the Management Console), and proxy.
Configure the Web interface. Web proxy commands follow. See
Interface (CLI)" on page 106
web
auto-logout <number_of_minutes>
enable
http enable [port <TCP_port>]
httpd listen enable [interface <interface_name>]
https enable [port <TCP_port>] [certificate regenerate]
proxy
auth
host <IP_address> port <TCP_port>
session
renewal <number_of_minutes>
timeout <number_of_minutes>
Notes:
•
auto-logout
automatically logs out a user. The no variant disables the automatic logout feature.
Default is 15 minutes.
•
enable
•
—Configure HTTP access to the Web interface.
http
•
enable
enabled. This setting is only meaningful if the Web interface as a whole is enabled via
the web enable command.
•
port
The no variant resets to default, but does not disable HTTP.
•
redirect
•
httpd listen
•
enable
enabled and at least one non-DHCP interface is specified in the list, HTTP
—If set, all seek requests to the origin server are tunneled; typically
for task details.
authtype {none | basic}
basic {password <plaintext_password> | username <username>}
—Control the length of user inactivity required before the Web interface
—Enable or disable (with no) the Web interface. Default is enabled.
—Enable or disable (with no) HTTP access to the Web interface. Default is
—Set the port number for HTTP access to the Web interface. Default is 8080.
—Enables re-direction to HTTPS to mandate secure access.
—Configure Web server interface access restrictions.
—Enable or disable (with no) the listen interface restricted list for HTTPD. If
Media Flow Controller CLI Commands
—Specify a name to signal the number of bytes
[redirect]
virtual-player type smoothstream-pub
"Configuring the Web
381