Figure 55 Service Config > Namespace Configure Page Detail (Parameters); Figure 56 Service Config > Namespace Configure Page (Pre-Stage User Configuration) - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Configuration Tasks (Web Interface)
Figure 55 Service Config > Namespace Configure Page Detail (Parameters)
Configuring Namespace Pre-Stage User (Web Interface)
Set a password for the auto-created FTP user for this namespace. See
To configure namespace Pre-Stage User:
1. Enter this information to the text boxes or select the checkbox as described:
• New Password and Confirm Password—For each configured namespace FTP user
(created automatically), set or reset a password.
2. Click Change Password.
3. Click Done at the bottom of the page if you are finished.
Figure 56 Service Config > Namespace Configure Page (Pre-Stage User Configuration)
Configuring Namespace HTTP Origin Fetch (Web Interface)
Configure options for HTTP fetching content from origin upon a cache miss. See
To configure namespace HTTP Origin Fetch:
1. Enter this information to the text boxes or select the checkbox as described:
• Cache Age Default—Specify a cache age value in case it is not specified in the data
fetched from the origin server. Default is 28800 seconds (8 hours).
• Date Header Modify Enable—Select to enable Media Flow Controller to set the Date
header to the current time when the content is served to the client (no adjustments are
made to the Cache-Control: max-age = <seconds> header, and the Age header
sent from origin is maintained). De-select to disable (default); Media Flow Controller
does not reset the Date header.
184 Configuring NameSpaces (Web Interface)
Media Flow Controller Administrator's Guide
Figure
Copyright © 2010, Juniper Networks, Inc.
56.
Figure 57.