Figure 23 Tacacs+ Page - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Administrator's Guide
Figure 23 TACACS+ Page
Default TACACS+ Settings
Configure Default TACACS+ Settings. See
To configure default TACACS+:
1. Enter this information to the text boxes:
• Key—A shared secret text string. If no key is set, the user is prompted for the key.
• Timeout—Timeout for retransmitting a request. Range is 1-60, default is 3.
Media Flow Controller Configuration Tasks (Web Interface)
Figure 23.
Configuring RADIUS, TACACS+, and SSH (Web Interface) 137