Terminal; Tracelog - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller CLI Commands

terminal

EXEC command. Set parameters for the CLI terminal: terminal length, type, and width.
terminal [length <integer>] [resize] [type <type>] [width <width>]
See "CLI Options" on page

tracelog

Configure trace log options. See
page 226
page 223
tracelog
copy <SCP>
filename <name>
on-the-hour {disable | enable}
rotate {filesize-MB <integer> | time-interval <integer>}
syslog replicate {disable | enable}
Notes:
•
—Auto upload (when the set filesize is reached) the tracelog using SCP (secure
copy
channel protocol), to the server specified using hostname. If username and password
are provided, Media Flow Controller uses that for authentication of the SCP session. The
no variant disallows auto upload. See
you must have an SCP server installed in order to SCP files to your machine.
•
filename
tracelog.<num>.yyyymmdd_hour:min:sec (numbered sequentially).
•
on-the-hour
•
rotate
•
filesize-MB
"trace.log.1," "trace.log.2" and so on all the way to "trace.log.10," after which it wraps
around. By default, each file size is 100MB. We highly recommend not increasing the
size; huge file transfers take a lot of time, and if there is a system reset, large volumes
of data are at risk.
•
time-interval
the trace log is rotated.
•
syslog replicate
part of SYSLOG; default is disable (trace log is not seen as part of SYSLOG).
370 terminal
60, cli session terminal arguments notes for details.
for task details including information on log rotation. See
for usage information.
—Configure the name of the file where the trace log is stored. Default is
—Set hourly log rotation. Default is no (disabled).
—Media Flow Controller allows trace log rotation based on file size or time.
—Set rotation based on file size. Media Flow Controller creates
—Set rotation based on time. Specify a time in minutes after which
—Specify whether (enable) or not trace log messages are seen as
Media Flow Controller Administrator's Guide
"Configuring Media Flow Controller Service Logs (CLI)" on
"Terminology" on page 30
"Trace Log (tracelog)" on
for the scp URL format);
Copyright © 2010, Juniper Networks, Inc.