Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual page 242

Configuring and Using Media Flow Controller Logs and Alarms
process-exit: A process in the system unexpectedly exited
cpu-util-ok: CPU utilization has fallen back to normal levels
cpu-util-high: CPU utilization has risen too high
disk-io-ok: Disk I/O per second has fallen back to acceptable levels
disk-io-high: Disk I/O per second has risen too high
disk-space-ok: Filesystem free space is back in the normal range
disk-space-low: Filesystem free space has fallen too low
netusage-ok: Network utilization has fallen back to acceptable levels
netusage-high: Network utilization has risen too high
memusage-ok: Memory usage has fallen back to acceptable levels
memusage-high: Memory usage has risen too high
cpu-util-ave-ok: Average CPU utilization has fallen back to normal levels
cpu-util-ave-high: Average CPU utilization has risen too high
paging-ok: Paging activity has fallen back to normal levels
paging-high: Paging activity has risen too high
Email notification recipients:
bobo@example.com (all events, in detail)
Autosupport emails
Enabled: yes
Recipient:
support@example.com
Mail hub:
mail.example.com
Events to send:
process-crash: A process in the system has crashed
liveness-failure: A process in the system was detected as hung
smart-warning: Smartd warnings
242 Configuring Media Flow Controller Fault Notifications (CLI)
Media Flow Controller Administrator's Guide
Copyright © 2010, Juniper Networks, Inc.