Viewing Network Usage - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Configuration Tasks (Web Interface)

Viewing Network Usage

Purpose
A last-hour graph of Network Usage including RX and TX information on all data ports. See
Figure 11
•
Bytes, packets, discards, errors, and overruns for RX and TX
•
RX mcast packets
•
RX frame
•
TX carrier
•
TX collisions
Action
•
From the left navigation pane in the Monitoring tab, click Network.
The Network Usage (Last Hour) page is displayed.
•
Use Pause and Resume buttons to stop/start graph charting.
Figure 11 Monitoring > Network Usage (Last Hour) Page Detail
118 Monitoring Media Flow Controller Statistics (Web Interface)
for graphic. Current statistics include:
Media Flow Controller Administrator's Guide
Copyright © 2010, Juniper Networks, Inc.