Table of Contents
Advertisement
Preface
CHAPTER 1
Preface
This Administrator's Guide is written for system and network administrators who plan,
implement, and manage video delivery environments. In addition to
2.0.4, this preface includes these topics:
•
Guide to This Document
•
Documentation and Release Notes
•
Text and Syntax Conventions
•
Terminology
•
Documentation Feedback
•
Requesting Technical Support
What's New in Release 2.0.4
Release 2.0.4 introduces minor feature enhancements and issue resolutions. This section
provides short descriptions of the feature enhancements in Release 2.0.4.
PXE Installation Enhancements
In Release 2.0.4, Media Flow Controller simplifies the PXE boot process by eliminating the
need for administrators to have an interactive console session to boot it. Administrators can
configure the PXE boot options at the PXE server, in the PXE configuration specification file
(PXE spec). The following new PXE boot functions are supported in Release 2.0.4:
•
No need to specify an URL for PXE boot
•
Option to pre-accept the End User License Agreement (EULA)
•
Automatically mark the interface that was used for PXE-booting as eth0
•
Ability to specify all installation options in the PXE spec so administrator does not have to
manually enter anything
See the
Media Flow Controller and Media Flow Manager Installation Guide
Installations on Non-Centos Linux Drives
On fresh installations, any partition data on the drive is overwritten. Previously, if disk drives
had non-Centos data when doing a fresh installation, the installer responded with a partition
error.
Copyright © 2010, Juniper Networks, Inc.
Media Flow Controller Administrator's Guide
What's New in Release
for details.
What's New in Release 2.0.4
27
Advertisement
Chapters
Table of Contents
Troubleshooting
