Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual page 153

Media Flow Controller Configuration Tasks (Web Interface)
Configuration Files
Choose a configuration and take action. See
To manage configuration files:
1. View this information for each available configuration file:
• Filename—Name of the configuration.
• Active—Whether or not the configuration is currently in use.
2. Select a file using the checkboxes, and:
• Click the filename link to open a printout of that configuration file.
• Click the view running config link to open a printout of the running configuration.
• Click Delete to remove from the system the selected configuration file.
• Click Switch-To to make the selected configuration active.
• Click Download to download the selected configuration as a binary file; you are given
the option of opening the file or saving it.
3. Click Save at the top of the page to make changes persistent across reboots.
Active Configuration
For the current, active configuration take various actions. See
To manage the active configuration:
1. Use the action buttons:
• Click Save to save the active configuration file
• Click Revert to discard the running configuration and apply the active configuration.
• Click Reset to reset both running and active configuration files to the factory defaults.
• Click Save As to save the active configuration as a new file; enter a name in the New
filename text box.
2. Click Save at the top of the page to make changes persistent across reboots.
Copyright © 2010, Juniper Networks, Inc.
Media Flow Controller Administrator's Guide
Figure 31.
Figure 32.
153