Configuring And Using Media Flow Controller Logs And Alarms - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Configuring and Using Media Flow Controller Logs and Alarms

CHAPTER 6
Configuring and Using Media Flow Controller Logs and Alarms
•
"Log Codes and Sub-Codes" on page 210
•
"Service Log (accesslog)" on page 212
•
"Cache Log (cachelog)" on page 214
•
"Error Log (errorlog)" on page 215
•
"FMSAccess Log (fmsaccesslog)" on page 217
•
"FMSEdge Log (fmsedgelog)" on page 218
•
"FMSConnector Log / fuselog" on page 219
•
"Stream Log (streamlog)" on page 220
•
"System Log" on page 220
•
"Tech-Support Log" on page 222
•
"Trace Log (tracelog)" on page 223
•
"About Log Rotation" on page 226
•
"Configuring Media Flow Controller Service Logs (CLI)" on page 226
•
"Media Flow Controller System Logging Overview" on page 228
•
"Configuring Log Statistics Thresholds (CLI)" on page 231
•
"Stats Measurement Counters" on page 233
•
"Stats Alarms" on page 234
•
"SNMP Alarms" on page 237
•
"Configuring Media Flow Controller Fault Notifications (CLI)" on page 240
Note! The Web interface name for the log is given, and the command line interface (CLI)
name is given in parentheses.
Copyright © 2010, Juniper Networks, Inc.
Media Flow Controller Administrator's Guide
209