Terminology - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Preface
Table 1 Text and Syntax Conventions Used in This Book (Continued)
Convention
Italic Text
Fixed-width
Text
Fixed-width
Bold Text
< > (angle brackets)
[ ] (box brackets)
{ } (braces)
| (pipe symbol)
... (ellipsis)

Terminology

This section provides definitions for Media Flow Controller terms and industry-standard terms
that may be unfamiliar to the reader.
Absolute URL An absolute URL points to the exact location of a file or directory on the
Internet, by name. Contrast with
AFR Assured Flow Rate. A Media Flow Controller option that, when enabled, ensures that
media content is delivered at a rate that is minimally needed for the video to play smoothly.
ARP Address Resolution Protocol; allows systems to map IP addresses to MAC addresses.
Bit-rate A data rate (the amount of data transferred in one direction over a link divided by the
time taken to transfer it) expressed in bits per second. Juniper Networks notation examples:
Kbps (kilobits per second), KB/s (kilobytes per second). See also
30 Terminology
Description
Book titles, and emphasis.
Syntax Conventions in the Command Reference Chapter
Command keywords.
Text displayed online at a command line.
Command text that you type.
Text enclosed in angel brackets (< >) is
variable and must be replaced by whatever
it represents. In the example to the right,
the user would replace <file_name> with
the name of the specific file.
Optional commands. Anything not
enclosed in brackets must be specified.
Represent a set of mutually exclusive
options, where one option is required.
Separates mutually exclusive options.
You can enter one of the options separated
by the vertical bar, but you cannot enter
multiple options in a singe use of the
command.
A vertical bar can be used to separate
optional or required options.
An ellipsis (...) indicates that the previous
option can be repeated multiple times with
different values. It can be used inside or
outside of brackets.
Media Flow Controller Administrator's Guide
See the Juniper Networks Media Flow
Manager Administrator's Guide and CLI
Command Reference
interface <interface_name>
Please enter your IP address
interface eth0 ip address <IP
address>
show file <file_name>
web proxy host <IP_address>
web proxy auth authtype
analytics last-evict-time
clock timezone <zone>
Relative URL.
Example
[port <TCP_port>]
{none | basic}
diff <1 | seconds>
[<zone>] ...
Profile (Bit-rate
Copyright © 2010, Juniper Networks, Inc.
profile).