Viewing The Fmsedge Log (Web Interface); Viewing The Dashboard - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Configuration Tasks (Web Interface)
Media Flow Controller Service log. See
details.
Continuous log, updated every 10 seconds.
Current log, that day's activity.
Download log—Opens a File Open dialog so you can save the trace log locally.
Archived (does not display if not applicable) log (1 - n), past logs.

Viewing the FMSEdge Log (Web Interface)

This Media Flow Controller service log lists transactions to the FMS edge server; for example,
"Connection rejected by server," "Edge disconnected from core," "Listener started for clients."
This log is generated by the FMS server (must be installed, see
Media Flow Controller (CLI)" on page
access the Media Flow Controller Service log. See
for details.
Continuous log, updated every 10 seconds.
Current log, that day's activity.
Download log—Opens a File Open dialog so you can save the trace log locally.
Archived (does not display if not applicable) log (1 - n), past logs.

Viewing the Dashboard

Dashboard page example given
Statistics:
•
Cumulative—The time since this Media Flow Controller has been running without reboot
or shutdown.
•
GB delivered—The total byte count of all objects Media Flow Controller has delivered
since running.
•
Byte hit ratio—The percentage of cumulative data (bandwidth) served from RAM/Disk/
TFM compared to Total Data Served since the start of Media Flow Controller.
•
Cache hit ratio—The number of objects Media Flow Controller served from RAM or Disk
divided by the total number of objects served.
•
Cache hit ratio
• Bandwidth—Total number of bytes delivered from RAM or Disk / Total number of
bytes delivered.
• Number of Requests—Total number of objects delivered form RAM or Disk / Total
number of objects delivered (irrespective of size).
•
Objects Delivered—The total number of objects served by this Media Flow Controller
since running.
192 Viewing the Dashboard
Media Flow Controller Administrator's Guide
"FMSAccess Log (fmsaccesslog)" on page 217
97). In the CLI this is the fmsedgelog. Use this tab to
"FMSEdge Log (fmsedgelog)" on page 218
"Media Flow Controller Dashboard Example."
"Installing and Using FMS in
Copyright © 2010, Juniper Networks, Inc.
for