Exit; File - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller CLI Commands

exit

Leave configuration mode or log out of the system.
exit
Exit the current mode. From configuration mode, go to enable mode. From enable or
standard mode, log out. Use disable to go from enable mode to standard mode.

file

Use these commands to manage stats, and tcpdump reports.
file
debug-dump
delete <filename>
email <filename>
upload <filename> {<URL> | <SCP>}
stats
delete <filename>
move <source_filename> <dest_filename>
upload <filename> {<URL> | <SCP>}
tcpdump
delete <filename>
upload <filename> {<URL> | <SCP>}
Notes:
•
debug-dump
•
delete
•
email
informational (info) events, regardless of whether they have requested to receive
detailed notifications or not.
•
upload
•
stats
•
delete
•
move
•
upload
•
tcpdump
•
delete
•
upload
* Only FTP and TFTP URLs, as well as SCP pseudo-URLs are supported for the destination.
See "Terminology" on page 30
show files
debug-dump [<filename>]
stats [<filename>]
tcpdump [<filename>]
316 exit
—Generate files useful for system debugging.
—Delete the specified debug dump file.
—Send the specified debug dump in email to the list of configured recipients for
—Upload the specified debug dump file to the specified URL*.
—Manipulate statistics report files. See
—Delete a statistics report file by name.
—Rename (to a new location) a statistics report file.
—Upload a statistics report file*.
—Manipulate tcpdump output files.
—Delete the specified tcpdump file.
—Upload the specified tcpdump file to the specified URL*.
for the scp URL format and requirements.
Media Flow Controller Administrator's Guide
stats for details.
Copyright © 2010, Juniper Networks, Inc.