Configuration - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller CLI Commands
collect counters
This command will capture all counter values two times every second for a total duration of 2
seconds. You will have four sets of counter data in the output file.
collect counters
This command will capture all counter values whose name pattern matches with the keyword
http, two times every second and for a total duration of 2 seconds. You will have four sets of
counter data in the output file.
Use reset counters to reset the counter values for the counter fields displayed with show
counters.
show counters {http | rtsp}
Notes:
•
show counters
counters alone; the rtsp option lists RTSP related counters. Without any option given, lists
the common counters data, HTTP-related and RTSP-related data.

configuration

The system can store one or more configuration files on persistent storage with one of the files
is designated as active: the file that configuration is loaded from on boot, and to which
configuration is saved upon a save request. Configuration changes are immediately applied to
the running configuration, but are not made persistent until they are explicitly saved using
configuration write. See
(CLI)" on page 104
configuration
copy {initial.bak | initial | <source_filename>} <dest_filename>
delete {<filename> | initial.bak | initial}
fetch {<URL> | <SCP>]
merge {<filename> | initial.bak | initial}
move {<source_filename> | initial.bak | initial} <dest_filename>
new <filename> [factory [keep-basic] [keep-connect]]
revert {factory [keep-basic] [keep-connect] | saved}
switch-to {<filename> | initial.bak | initial}
text
fetch <URL_or_SCP>
file <filename>
generate
upload {active <URL> | initial.bak | initial}
write [to <filename>] [no switch]
304 configuration
detail -
detail http
—List the stats counter details. The http option lists HTTP-related
"Saving and Applying Configurations, Resetting Factory Defaults
for task details.
apply [discard][fail-continue][verbose]
filename <filename> [apply [fail-continue][verbose]]
apply [fail-continue][verbose]
delete
rename <new_filename>
upload <URL or SCP>
active {running | saved} [save <filename>] [upload <URL_or_SCP>]
file {<filename> | initial | initial.bak}
[upload <URL_or_SCP>]
Media Flow Controller Administrator's Guide
frequency 2 duration
frequency 2 duration
Copyright © 2010, Juniper Networks, Inc.
2
2
[save <filename>]