Virtual Player Smoothflow Type Configuration - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Administrator's Guide
• Health-Probe Configuration (See
example of uol offset and uol length. See
explanation).
•
•
•
• Seek Configuration
•
•
• Assured Flow Configuration
•
•
•
•
• Connection Bandwidth Configuration
•
2. Click Add/Update.
3. Click Save at the top of the page to make changes persistent across reboots.

Virtual Player smoothflow Type Configuration

After adding a smoothflow virtual player, click Configure in the list of virtual players to open
configuration pages (in a new window) for that type of virtual-player. Click Add/Update on
each configuration page and simply close the window when you are done. Verify your
configurations by clicking Show in the virtual player list.
Active—Select to activate the feature; de-select to de-activate it.
Query String Param—This is the value that, when processed by the hash digest,
must match the Match String value.
Match String—Set the secret string that the hash attempts to verify.
Active—Select to activate the feature; de-select to de-activate it.
Query String Param—Enter a name to tell Media Flow Controller whether or not
to implement seek.
Active—Select to activate the feature; de-select to de-activate it.
Rate (kbps)—Set a rate no higher than the configured connection max-
bandwidth.
Auto—Not supported in Release 2.0.4.
Query String Param—Enter a query param to signal the desired assured-flow
rate.
Max Session Rate (kbps)—Set the maximum bandwidth for a session. The
actual session bandwidth is between the AFR (Assured Flow Rate) and this value.
Even if there is available bandwidth in the link, Media Flow Controller does not
allocate more than this value for a session. When it is a full download, Media Flow
Controller tries to allocate the max-bandwidth to the session. Default it is 0 Kbps
(unbounded) with the Media Flow Controller license.
the Media Flow Controller license installed to change the default (200 kbps
without the license).
Media Flow Controller Configuration Tasks (Web Interface)
"Terminology" on page 30
"Using hash-verify" on page 76
Configuring Virtual Players (Web Interface)
for explanation and
for
Important! You must have
175