Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual page 257

Media Flow Controller Administrator's Guide
Table 22 setup.xml File Parameters (Continued)
Parameters
<ftp_source_location>
<ftp_dest_location>
<status_polling_duration>
< ?xml version="1.0"?>
<!—Global Setup Configuration Parameters-->
<setup_info>
<!—Provide URI and login credentials to access encoding service provider-->
<service_provider>
<name pre_process="1"> {name_of_encoding_service} </name>
<login userid={value} userkey={value}> </login>
</service_provider>
<!—Provide the source and destination locations for the FTP folders where the
files will be picked up, encoded, and the results transferred to-->
<ftp_source_location>
<username> {username} </username>
<password> {password} </password>
<server_ip> {ftp_source_server_IP} </server_ip>
<path> {/in} </path>
</ftp_source_location>
<ftp_dest_location>
<username> {username} </username>
<password> {password} </password>
<server_ip> {ftp_dest_server_IP} </server_ip>
<path> {/out} </path>
</ftp_dest_location>
<!-- polling interval for status messages at the command line, in seconds-->
<status_polling_duration> {9000} </status_polling_duration>
</setup_info>
Information regarding the output profiles with following attributes
<username> – the authorized FTP user
<password> – the authorized FTP user password
<server_ip> – FTP server IP address, source and destination, respectively, (if
different)
<path> – path in or out, respectively
How often you want progress status messages to display at the command line.
SmoothFlow Deployment
Tags and Descriptions
Creating Assets Using an SaaS 257