Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual page 307

Media Flow Controller Administrator's Guide
file <filename>
apply [fail-continue][verbose]
delete
rename <new_filename>
upload <URL or SCP>
generate
active {running | saved} [save <filename>] [upload <URL_or_SCP>]
file {<filename> | initial | initial.bak}
Notes:
•
fetch
"Terminology" on page 30
fetched file :
•
filename <filename>
the same name as it had on the server. All apply options, except discard, are
available for fetched and named text files.
•
apply
you have additional options:
•
•
•
•
file <filename>
•
apply
commands execute as the present user, lack of required privilege could cause some
to fail. The configuration is not reset before executing the commands, so the resulting
configuration, overlaid on top of the running configuration, may be more than what is
in the configuration text file.
•
•
•
delete
•
rename <filename>
•
upload
•
generate
•
active running
configuration running).
•
active saved
•
file
After the text file is generated, you have these options:
•
•
<URL_or_SCP>]
—Download a text-based configuration file from the specified remote host; see
for the scp URL format and requirements. Options for the
—If you opt to apply the fetched configuration text file to the running system,
—After the configuration text file is applied, discard it; cannot follow
discard
fetch <URL_or_SCP> filename <filename> apply.
—If any of the commands in the text file fail, continue applying
fail-continue
the rest of the commands.
—List all commands being executed and their output instead of just
verbose
those that get errors.
—Manage stored text-based configuration files:
—Execute the commands in the specified configuration text file. The
—If any of the commands in the text file fail, continue applying
fail-continue
the rest of the commands.
—List all commands being executed and their output instead of just
verbose
those that get errors.
—Delete the specified configuration text file.
—Rename the specified configuration text file.
—Upload the specified configuration text file to the specified remote host.
—Generate a new configuration text file from this system, based on either:
—The current active, running configuration (as in show
—The current active saved configuration (as in show configuration)
—An inactive, saved, configuration file (as in show configuration files).
—Save the newly generated text file to the specified filename.
save
—Upload the newly generated text file to the specified location.
upload
—Name the fetched file; if no filename is specified, it is given
Media Flow Controller CLI Commands
[save <filename>] [upload
configuration text 307