Configure; Debug; Delivery - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller CLI Commands

configure

Enter configuration mode from Enable mode.
configure terminal
From enable enter configure terminal to go to Configuration mode. Use exit to go from
Configuration mode to Enable mode; disable to go from Enable mode to Standard mode.

debug

Generate debugging information for Media Flow Controller functions.
debug generate dump
Generate a debugging dump (sysdump). The dump can then be manipulated using the file
debug-dump family of commands; see
Important!
commands should be turned on only for troubleshooting specific problems or during
troubleshooting sessions with technical support personnel. Excessive debugging output can
render the system inoperable.
•
show files debug-dump [<filename>]
specified, list the contents of a particular debug dump file.
•
file debug-dump delete <filename>
•
file debug-dump upload <filename> {<URL> | <SCP>}
debug dump file to the specified URL. Only FTP and TFTP URLs, as well as SCP pseudo-
URLs are supported for the destination. See
format and requirements. The uploaded file is a gnu-zipped .tar file (.tgz) and can be
unzipped with this command on Linux: gunzip -c <filename>.tgz | tar tf -
or with WinZip on a Windows system.
•
file debug-dump email <filename>
list of configured recipients for informational (info) events, regardless of whether they
have requested to receive detailed notifications or not. See
recipients.

delivery

Set delivery options, including listen interfaces, for delivering content to the player (end-user/
consumer). If not specified, default actions take place in the delivery path. This command sets
global attributes; use
"Configuring Media Flow Controller Delivery Protocol (CLI)" on page 73
delivery protocol {http | rtsp}
allow-req {all | <method1> [<method2>] [<method3>]... [<method16>]}
conn-pool
max-arp-entry <number>
origin
308 configure
The system gives high priority to debugging output. For this reason, debugging
namespace
disable
enable
Media Flow Controller Administrator's Guide
file for details.
—List debug dump files or, if filename is
—Delete the specified debug dump file.
"Terminology" on page 30
—Send the specified debug dump in email to the
to set these attributes on a namespace basis. See
—Upload the specified
for the scp URL
email for setting notification
for task details.
Copyright © 2010, Juniper Networks, Inc.