Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual page 241

Media Flow Controller Administrator's Guide
1. Configure who should receive email event notifications. The class option lets you simply
choose a class of events for the specified recipients. The event option lets you add
specified events to the info event class. The detail option only applies to process crash
events; by default it is enabled.
email notify recipient <email_address> [class {[failure] [info]}] [detail]
email notify event <event_name>
2. Set domain (default is configured ip domain-list), mailhub (SMTP server), mailhub-
port, return address, and include or exclude (with no) the return host in email notifications
(default is include).
email domain {<hostname> | <IP_address>}
email mailhub {<hostname> | <IP_address>}
email malhub-port <port_number>
email return-addr <username>
email return-host
3. Disable or enable event emails sent to Juniper Networks for certain pre-configured events;
default is enabled. Use no email autosupport enable to disable.
email autosupport enable
4. Manage undeliverable emails. Use cleanup max-age to set when to permanently delete.
dead-letter enable [cleanup max-age <duration>]
5. Send a test email to all the configured email notify recipients.
email send-test
6. To verify configurations:
show email
Example:
test-vos (config) # email notify recipient bobo@example.com
test-vos (config) # email notify event disk-io-high
test-vos (config) # email domain example.com
test-vos (config) # email mailhub mailgate1.example.com
test-vos (config) # email mailhub-port 22
test-vos (config) # email return-addr support@example.com
test-vos (config) # email return-host
test-vos (config) # email autosupport enable
test-vos (config) # email dead-letter enable
test-vos (config) # show email
Mail hub:
Mail hub port:
Domain:
Return address: support@example.com
Include hostname in return address: yes
Dead Letter settings:
Save dead.letter files: yes
Dead letter max-age: (none)
Failure events for which emails will be sent:
process-crash: A process in the system has crashed
smart-warning: Smartd warnings
unexpected-shutdown: Unexpected system shutdown
Informational events for which emails will be sent:
liveness-failure: A process in the system was detected as hung
Configuring and Using Media Flow Controller Logs and Alarms
Note! The mailhub option must be sent for notifications to work.
mailgate1.example.com
22
example.com
Configuring Media Flow Controller Fault Notifications (CLI) 241