Application; Arp - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Administrator's Guide
Notes:
•
cache-ingest size-threshold <bytes>
be optionally ingested into the fastest cache tier in the disk cache. Objects smaller than, or
equal to, the configured size are automatically written to the fastest cache tier. Default is 0
(zero), no objects are directly promoted to the fastest tier. Maximum allowed value is 4GB
(4294967295).
•
cache-promotion
tier and "cold" objects (least requested) to a slower cache tier. Options:
•
enable
enabled; if disable is used, no cache promotion occurs.
•
hotness-threshold
candidate for promotion to a higher tier in disk cache. Default is 3, an object requested
three times becomes a candidate for cache promotion.
show analytics
List current analytics settings.

application

Flash Media Server (FMS) configuration on Media Flow Controller. See
FMS in Media Flow Controller (CLI)" on page 97
application fms
download <URL>
install <filename>
shell
Notes:
•
download <URL>
options are SCP, HTTP, and FTP.
•
install <filename>
•
shell
"Installing and Using FMS in Media Flow Controller (CLI)" on page

arp

Manage the ARP (address resolution protocol) cache.
arp <IP_address> <MAC_address>
Add or delete (with no) static entries to the ARP cache.
show arp [static]
List contents of ARP cache. This should contain all of the statically-configured ARP entries, as
well as any that the system has picked up dynamically. Use the subcommand static to list only
statically-configured ARP entries.
—This function moves "hot" objects (most requested) to a faster cache
and disable —Either enable or disable cache promotion analytics; default is
—Set a threshold for "hotness" value after which an object is
—Download the FMS from the specified URL. Available download
—Installs the downloaded FMS.
—Open a shell window and configure FMS for Media Flow Controller; see
Media Flow Controller CLI Commands
—Set the maximum size of an object that can
for task details.
"Installing and Using
97.
application 293