Streamlog - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Administrator's Guide
Table 35 Stats Samples (Continued)
Stat Sample
disk_io
fs_mnt_bytes
fs_mnt_inodes
http_transaction_count
interface
intf_day
intf_month
intf_util
intf_week
memory
num_of_connections
origin_byte_count
origin_byte_count_day
origin_byte_count_week
paging
perdiskbytes
peroriginbytes
perportbytes
proc_mem
total_bytes
total_bytes_day
total_bytes_week
total_cache_byte_count
total_disk_byte_count
total_origin_byte_count

streamlog

Configure the Media Flow Controller RTP/RTSP streaming events log. See
Media Flow Controller Service Logs (CLI)" on page 226
on log rotation. See
streamlog
copy <SCP>
filename <filename>
format <field1 field2 ...>
Disk I/O (input/output, in kilobytes); default = 15 seconds.
Filesystem usage, in bytes; default = 1 minute.
Filesystem usage, in inodes; default = 1 minute.
Number of HTTP transactions (GET requests) per second; default = 10 seconds.
Network interface statistics; default = 30 seconds.
Network interface statistics for the last 24 hours; default = 5 minutes.
Network interface statistics for the last 30 days; default = 4 hours.
Network interface utilization, in bytes; default = 5 seconds.
Network interface statistics for the last 7 days; default = 30 minutes.
System memory utilization, in bytes; default = 20 seconds.
Current number of HTTP connections; default = 10 seconds.
Bandwidth being served from Origin; default = 10 seconds.
Bandwidth served from Origin for the last 24 hours; default = 5 minutes.
Bandwidth served from Origin for the last 7 days; default = 30 minutes.
Paging activity: page faults; default = 20 seconds.
Number of bytes being served from each disk drive; default = 10 seconds.
Number of bytes being served from origin; default = 10 seconds.
By-port I/O (input/output), in kilobytes per second; default = 10 seconds.
Memory used by Media Flow Controller processes; default = 30 seconds.
Total data bandwidth being served in the system; default = 10 seconds.
Total data bandwidth served in the last 24 hours; default = 5 minutes.
Total data bandwidth served in the last 7 days; default = 30 minutes.
Total data bandwidth being served from cache; default = 10 seconds.
Total data bandwidth being served from disk; default = 10 seconds.
Total data bandwidth being served from origin; default = 10 seconds.
"Stream Log (streamlog)" on page 220
Media Flow Controller CLI Commands
Description
for task details including information
for usage information.
"Configuring
streamlog 365