Virtual Player Qss-Streamlet Type Configuration - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Administrator's Guide
To configure a break type virtual player:
1. Enter this information to the text boxes or select the checkbox as described:
• Assured Flow Configuration
•
•
•
•
• Fast Start Configuration
•
•
•
•
• Seek Configuration
•
•
• Hash Verify Configuration See
•
•
•
•
•
•
•
•
2. Click Add/Update.
3. Click Save at the top of the page to make changes persistent across reboots.

Virtual Player qss-streamlet Type Configuration

After adding a qss-streamlet virtual player, click Configure in the list of virtual players to
open configuration pages (in a new window) for that type of virtual-player. Click Add/Update
on each configuration page and simply close the window when you are done. Verify your
configurations by clicking Show in the virtual player list.
Active—Select to activate the feature; de-select to de-activate it.
Rate (kbps)—Set a rate no higher than the configured connection max-
bandwidth.
Auto—Not supported in Release 2.0.4.
Query String Param—Enter a query param to signal the desired assured-flow
rate.
Active—Select to activate the feature; de-select to de-activate it.
Size (KB)—Define how many kilobytes should be expedited.
Time—Define how many seconds should be expedited.
Query String Param—Specify a query param (associated value must be in
kilobytes).
Active—Select to activate the feature; de-select to de-activate it.
Query String Param—Enter a name to tell Media Flow Controller whether or not
to implement seek.
Active—Select to activate the feature; de-select to de-activate it.
Data String—Not supported in Release 2.0.4.
UOL Length—Not supported in Release 2.0.4.
UOL Offset—Not supported in Release 2.0.4.
URI Query String Param—This is the indicator of the provided hash value in the
URL that, when processed by the hash digest, must match the Shared Secret
Value .
Digest—Only md-5 is supported in Release 2.0.4.
Shared Secret Type—Either append or prefix to the URL the shared secret
value.
Shared Secret Value—A secret key which must match the hash value provided
in the URL and indicated by the URI Query String Parm.
Media Flow Controller Configuration Tasks (Web Interface)
"Using hash-verify" on page 76
Configuring Virtual Players (Web Interface)
for details.
171