Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual page 126

Media Flow Controller Configuration Tasks (Web Interface)
Static and Dynamic Name Servers
View all configured static and dynamic name servers:
•
IP Address—Of the configured name server.
•
Active—Whether or not this name server is being used currently.
•
Source—"Configured" means it was manually added; "Dynamic" means it came from a
name server.
Add or Modify Name Servers
To add or modify name servers:
1. You can set up to three dynamic name servers; for each option, enter an IP address.
• Primary DNS IP address—This name server is tried first.
• Secondary DNS IP address—This name server is tried second.
• Tertiary DNS IP address—This name server is tried last.
2. Click Apply to immediately apply changes; Cancel to revert to existing configuration.
3. Click Save at the top of the page to make changes persistent. See
Static and Dynamic Domain Names
View all configured static and dynamic domain names:
•
Domain—The configured name for that domain.
•
Active—Whether or not this domain name is being used currently.
•
Source—"Configured" means it was manually added; "Dynamic" means it came from a
name server.
Configured Domain Names
To delete a domain name:
1. Select a configured domain name from the list and click Remove Selected.
2. Click Save at the top of the page to make changes persistent. See
Add New Domain Name
To add a domain name:
1. Enter a Domain Name and click Add Domain Name; it can be removed via the list of
Configured Domain Names described above.
2. Click Save at the top of the page to make changes persistent. See
126 Configuring Interfaces, Default Gateway, Static Routes, DNS and Domain Names, Hostname and Banners
Media Flow Controller Administrator's Guide
Figure
Figure
Figure
16.
16.
16.