Write - Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Manager Administrator's Guide
•
•
—Specify a proxy to be used for any HTTP or FTP downloads. If no port is specified,
host
the default is 1080.

write

write
memory
terminal
Notes:
•
memory
•
terminal
configuration. Displays commands to recreate the current running configuration.
auth authtype is set to basic. Note the password is accepted and stored in
plaintext.
username <username>
an authenticating proxy. Only used if the web proxy auth authtype is set to
basic. Note the user name is accepted and stored in plaintext.
—Save running configuration to the active configuration file.
—Show the currently running configuration, rather than the active saved
—Specify a username for HTTP basic authentication with
CHAPTER 5 CLI Commands
write 151