Mfdlog - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller CLI Commands
show media-cache disk dc_2
Disk Cache Configuration & Status:
Device Name/Type: dc_2/SATA
Cache Tier: Tier-3
Activated: yes
Cache Enabled: yes
Free Space: 68596 MiB
Disk State : cache running
-------------------------------------

mfdlog

Configure accesslog and errorlog ports and interfaces.
mfdlog
field-length <number>
interface <interface_name> tcp port <port_number>
Notes:
•
field-length
•
interface <interface_name> tcp port
default port is 7957.
334 mfdlog
—Number of lines allowed per log field.
Media Flow Controller Administrator's Guide
—Interface and port on which mfdlog listens,
Copyright © 2010, Juniper Networks, Inc.