Stats Chds; Table 34 Stats Chds - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller CLI Commands
Table 33 Stats Alarms (Continued)
Stats Alarm
paging
perdiskbyte_rate *
peroriginbyte_rate *
perportbyte_rate *
total_byte_rate
cmc_status
mfds_tx_bw
* Disabled by default; all others are enabled by default.

stats CHDs

Stats CHDs are shown in
CHDs are 1 data point.
Table 34 Stats CHDs
Stat CHD
avg_cache_byte_rate
avg_disk_byte_rate
avg_origin_byte_rate
bandwidth_day_avg
bandwidth_day_peak
bandwidth_month_avg
bandwidth_month_peak
bandwidth_week_avg
bandwidth_week_peak
cache_bandwidth_day
362 stats CHDs
Paging activity (page faults). The units for the paging alarm are number of pages
read from, or written to, the swap partition. The alarm is on the amount of paging
activity that has occurred over the past 20 seconds. Default rising error threshold
is 2000 page faults; default rising clear threshold is 1000 page faults.
Total number of bytes served from each disk drive divided by system up time on a
per-disk basis; cumulative (not per-disk).
Total amount of data fetched per origin server divided by system up time;
cumulative (not per-origin).
By-port I/O (input/output, in kilobytes) per second.
Total data bandwidth being served in the system; does not include management
traffic on Ethernet port.
CMC status check failure.
Transmissions out (TX) bandwidth of managed Media Flow Controllers is too high.
Table 34; unless otherwise noted, default interval and range for all
Total number of bytes served from RAM/buffer cache divided by system up time.
Total number of Bytes served from all disks divided by system up time.
Total number of Bytes fetched from Origin divided by system up time.
Amount of data fetched averaged over 24 hours. Default interval is 900 seconds,
default range is 900 seconds.
High point of data fetched averaged over 24 hours. Default interval is 900
seconds, default range is 900 seconds.
Amount of data fetched averaged over 30 days. Default interval is 14400 seconds,
default range is 14400 seconds.
High point of data fetched averaged over 30 days. Default interval is 14400
seconds, default range is 14400 seconds.
Amount of data fetched averaged over 7 days. Default interval is 3600 seconds,
default range is 3600 seconds.
High point of data fetched averaged over 7 days. Default interval is 3600 seconds,
default range is 3600 seconds.
Bandwidth served from RAM/buffer cache over last 24 hours.
Media Flow Controller Administrator's Guide
Description
Description
Copyright © 2010, Juniper Networks, Inc.