Viewing The Fmsaccess Log; Fmsedge Log (Fmsedgelog) - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Configuring and Using Media Flow Controller Logs and Alarms
•
x-sname—Stream name
•
sc-stream-bytes—The number of bytes transferred from the server to the client per
stream.
•
x-file-size—Stream size in bytes.
•
x-file-length—Stream length in seconds
•
x-status—Request status codes
•
x-comment—Any comments about session
•
c-proto—Connection protocol RTMP or RTMPT
•
s-uri—URI of the FMS application
Example:
session connect 2010-05-27
session connect 2010-05-27
session connect 2010-05-27
session connect 2010-05-27
session connect 2010-05-27
stream play 2010-05-27
2mbpsMP4_159.mp4
stream stop 2010-05-27
2mbpsload/2mbpsMP4_100.mp4
session disconnect
- - 200
session disconnect
- - 200
session disconnect
- - 200
stream stop 2010-05-27
2mbpsload/2mbpsMP4_111.mp4
stream stop 2010-05-27
2mbpsload/2mbpsMP4_231.mp4

Viewing the FMSAccess Log

To view the Media Flow Controller FMSAccess log:
•
Web interface—Media Flow Controller FMSAccess log entries are available for viewing on
the Web interface Logs tab, FMSAccess Log page.
•
CLI—To upload the fmsaccesslog, run upload fmsaccesslog scp://<URL>. Now you can
access the FMSAccess log at the specified system, move it (if needed) and view its
contents. See

FMSEdge Log (fmsedgelog)

FMSEdge Log is used for diagnostic purposes and lists transactions to the FMS edge server;
for example, "Connection rejected by server," "Edge disconnected from core," "Listener
started for clients." This log is generated by the FMS server (must be installed, see
and Using FMS in Media Flow Controller (CLI)" on page
fms/logs/edge.<nn>.log, by default (you can access this using application fms shell). See
218 FMSEdge Log (fmsedgelog)
09:32:13
09:32:13
09:32:13
09:32:13
09:32:13
09:32:13
0 148586967
10:03:27
59363080
2010-05-27 10:03:27
2010-05-27 10:03:27
2010-05-27 10:03:27
10:03:27
57687110
10:03:27
60804903
"Terminology" on page 30
Media Flow Controller Administrator's Guide
23835 10.4.1.101
23835 10.4.1.101
23835 10.5.1.101
23835 10.5.1.101
23835 10.4.1.101
23835 10.5.1.101
596.459000 200
14959 10.3.1.101
148586967 596.459000
14959 10.3.1.101
14959 10.3.1.101
14959 10.3.1.101
14959 10.3.1.101
148586967 596.459000
14959 10.1.1.101
148586967 596.459000
for the scp URL format and requirements.
97). This log is written to /nkn/adobe/
Copyright © 2010, Juniper Networks, Inc.
3073 3073 - -
3073 3073 - -
3073 3073 - -
3073 3377 - -
3073 3073 - -
3175 3451 2mbpsload/
3175 59388577
408
3175 59309712
3175 59309676
3175 59309712
3175 57711996
408 -
3175 60830983
408 -
- - 200
- - 200
- - 200
- - 200
- - 200
- -
- -
- -
"Installing