Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual page 288

Media Flow Controller CLI Commands
interface
ip Configure IP addresses.
ldap Set up Light-weight Directory Access Protocol (LDAP).
license Activate features using license keys.
logging Configure event logging.
management
media-cache
mfdlog Configure accesslog and errorlog ports and interfaces.
namespace
network Make network layer configurations.
no Negate or clear certain configuration options.
ntp and ntpdate
ping EXEC. Send ICMP echo requests to a specified host.
radius-server
ram-cache
reload Reboot or shut down the system.
reset Reset the system to its factory state.
server-map
service Restart certain services after an IP address or delivery protocol port change.
show List system configuration or statistics; applies to most commands; for example, show
files lists available files or lists their content, if the file is specified. Includes special
subcommands. Many are
slogin EXEC. Log in to another system securely using SSH.
snmp-server
ssh Configure SSH (secure shell) settings.
stats Configure statistics and alarms.
streamlog
tacacs-server
tcpdump
tech-support
telnet EXEC. Log into another system using telnet.
telnet-server
terminal EXEC. Set terminal options. See
tracelog Configure trace log.
traceroute
upload Upload the accesslog, errorlog, or a namespace object.
username
virtual-player
web Configure the Web interface, also known as the Management Console.
write Save the running configuration to persistent storage.
288
Configure network interfaces.
Configure management interface (eth0).
EXEC. Configure disk-cache and file-cache settings.
Configure namespaces. Includes
Configure NTP (Network Time Protocol) servers and system clock.
Configure RADIUS server settings.
RAM cache options.
Specify a file and protocol for resolving incoming cache-miss requests.
EXEC
Configure SNMP (simple network management protocol) server options.
Configure streaming log.
Configure TACACS+ server settings.
List packets on a network.
EXEC. Collect system information.
Enable/disable the TELNET server.
EXEC. Trace the route packets take to a destination.
Configure user accounts and set capabilities.
Configure Media Flow Controller player management functions.
Media Flow Controller Administrator's Guide
EXEC command namespace object list.
commands.
"CLI Options" on page 60.
Copyright © 2010, Juniper Networks, Inc.