Figure 32 System Config > Configurations Page Detail (Configuration Files); Figure 33 System Config > Configurations Page Detail (Configuration Files) - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Configuration Tasks (Web Interface)
Figure 32 System Config > Configurations Page Detail (Configuration Files)
Upload Configuration File
Upload as local binary file or a local text file. See
Figure 33 System Config > Configurations Page Detail (Configuration Files)
Execute CLI Commands
Use this text box to enter CLI commands, each on a separate line, to be executed ad-hoc. End
with the write memory command. When done, click Execute CLI commands.
Import Configuration
Retrieve a configuration from a remote system. See
To import a configuration:
1. Enter this information to the text boxes:
• Hostname or IP address—The location of the desired configuration.
• Remote Username—Login username.
• Remote Password—Login password for the set Remote Username.
• Remote Config Name—File name of the desired configuration.
• New Config Name—A new name for the imported configuration (optional).
• Import shared data only—Uncheck to import all nodes, even those not available on
this system.
154
Media Flow Controller Administrator's Guide
Figure 33.
Figure 34.
Copyright © 2010, Juniper Networks, Inc.