Ssh; Ssh Client; Table 32 Snmp Traps Notify-Able Events - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Administrator's Guide
Table 32 SNMP Traps Notify-able Events
cpu-util-high
cpu-util-ave-ok
disk-io-high
disk-space-low
interface-down
interface-up
liveness-failure
memusage-high
netusage-high
paging-high
process-crash
process-exit
smart-warning
unexpected-shutdown

ssh

Configure your SSH client and server. See

ssh client

Configure SSH (secure sockets shell) client options.
ssh client
global
host-key-check {ask | no | yes}
known-host <known_host_entry>
user {<username> | admin | cmcrendv | monitor}
authorized-key sshv2 <public_key>
identity {<key_type> | rsa2 | dsa2}
known-host <IP_address> [remove]
Notes:
•
global
•
host-key-check
done. Use no to disable host key checking. Arguments:
Trap
CPU utilization has risen too high.
CPU utilization has fallen back to acceptable levels.
Disk I/O per second has risen too high.
Filesystem free space has fallen too low.
An interface's link state has changed to down.
An interface's link state has changed to up.
A process in the system was detected as hung.
Memory usage has risen too high.
Network utilization has risen too high.
Paging activity has risen too high.
A process in the system has crashed.
A process in the system unexpectedly exited.
Smartd warnings.
Unexpected shutdown.
generate
private-key [<key>]
public-key <key>
—Configure global SSH client settings.
—Set SSH client configuration to control how host key checking is
Media Flow Controller CLI Commands
Description
ssh client and ssh server.
ssh 355