Figure 28 Faults Page - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Configuration Tasks (Web Interface)
Figure 28 Faults Page
Fault Reporting
Set SMTP server, Domain name overrides, Return address, and other options. See
To set fault reporting:
1. Enter this information to the text boxes:
• SMTP server—Use a hostname or IP address to set the mail relay (mailhub in the
CLI) to use to send notification emails.
146 Configuring SNMP, Faults, and Logging (Web Interface)
Media Flow Controller Administrator's Guide
Copyright © 2010, Juniper Networks, Inc.
Figure 28.