Fmsaccesslog - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Administrator's Guide
Notes:
•
debug-dump
contents of a particular debug dump file.
•
stats
particular statistics report file.
•
tcpdump
a particular tcpdump file.

fmsaccesslog

Configure FMS (Flash Media Server) access log options; this log is generated by the FMS
server. In the Web-based interface, this log is displayed as FMSAccess Log under the Logs
tab. This log is written to /nkn/adobe/fms/logs/access.<nn>.log, by default (you can access
this using application fms shell, which takes you to fms directory).
The fmsaccesslog lists all FMS server command executions. Streaming fmsaccesslog events
include play, pause, seek, and stop events; session fmsaccesslog events include connect,
disconnect, and connect-pending events, by default. For each of these events, the
fmsaccesslog has at least some of the follow fields logged:
•
—Date the event is logged
date
•
—Time the event is logged
time
•
—Client IP address
c-ip
•
c-proto
•
s-uri
After FMS is installed (see
page 97) you can access the Logger.xml file to read more about the FMS access log and
make some configuration changes. This file is located in /nkn/adobe/fms/conf; you can access
this using application fms shell, which takes you to the fms directory.
See "Configuring Media Flow Controller Service Logs (CLI)" on page 226
including information on log rotation. See
usage information.
fmsaccesslog
copy <SCP>
filename <name>
on-the-hour {disable | enable}
rotate {filesize-MB <integer> | time-interval <hours>}
syslog replicate {disable | enable}
Notes:
•
—Auto upload (when the set rotate criteria is reached) the FMS access log using
copy
SCP (secure channel protocol), to the server specified using hostname. If username and
password are provided, Media Flow Controller uses that for authentication of the SCP
session. The no variant disallows auto upload. See
—List debug dump files. Use the filename option to list a summary of the
—List statistics report files. Use the filename option to list the contents of a
—List tcpdump files. Use the filename option to list a summary of the contents of
—Client connection protocol, either rtmp or rtmpd
—URI of the FMS application
"Installing and Using FMS in Media Flow Controller (CLI)" on
Media Flow Controller CLI Commands
"FMSAccess Log (fmsaccesslog)" on page 217
"Terminology" on page 30
for task details
for
for the scp
fmsaccesslog 317